Shop now for the ultimate cigar and humidor combo. $19.99 for 10 Cigars + Humidor at Cigars International
Sale/Discount cigars international, cigar, stogie, humidor
Cigars International, cigars, humidors, tobacco, smoking,
Tuesday, October 4, 2016
#Sale/Discount cigars international, cigar, stogie, humidor
Sale/Discount cigars international, cigar, stogie, humidor
Shop now for the ultimate cigar and humidor combo. $19.99 for 10 Cigars + Humidor at Cigars International
$19.99 for 10 Cigars + Humidor
16-Sep-2016 9:30 AM to 30-Dec-2017 9:00 PM
Sale/Discount cigars international, cigar, stogie, humidor
Shop now for the ultimate cigar and humidor combo. $19.99 for 10 Cigars + Humidor at Cigars International
Sale/Discount cigars international, cigar, stogie, humidor
Wednesday, September 7, 2016
160W Kangertech Dripbox TC Starter Kit W/O Battery(Black)
160W Kangertech Dripbox TC Starter Kit W/O Battery(Black)
160W Kangertech Dripbox TC Starter Kit W/O Battery(Black)
Product Introduction: 160W Kangertech Dripbox TC Starter Kit W/O Battery
Powered by two 18650 batteries, 160W Kangertech Dripbox TC Starter Kit inherits bottom feeder and squeeze mechanism from previous 60W Dripbox. You can enjoy dripping without actually dripping. With Max 160W output, it supports TC/VW modes.
Parameters:160W Kangertech Dripbox TC Starter Kit W/O Battery
Dripmod 160
Height: 84mm
Max output: 160W
Juice capacity: 7ml
Battery: 2 x 18650 cell, 30A discharge (NOT included)
Charging: Micro USB port/DC5V/1000mA
Temp Range: 200F -600F/ 100°C -315°C
Suggested resistance: Ni200 (TC mode), Ti, SS at 0.05ohm or above; Nichrome wire at 0.1ohm or above.
Suitable resistance: 0.2ohm or above kanthal
Subdrip 160
Height: 26mm
Diameter: 22mm
Connection: 510 thread with juice delivery mechanism
Coil attach: Stainless steel DIY drip base; 0.25ohm ( 2 x 0.5ohm in parallel)
Replacement coil: Kanthal 0.2ohm (2 x 0.4ohm in parallel)
Airflow: adjustable
Dripbox 160 Kit comes with
Easy DIY base
MTL and DL drip tip
7ml e-liquid capacity
Disposal dripping coil
Replaceable dual 18650
Squeeze to adjust your e-juice
Bottom feeder
Easy juice filling without dropper
160W Output with TC function
2. After switched on, LCD displays" KANGER TECH" in standby mode.
3. Press fire button 3 times, choose your preferred resistance wire, Ni200, Ti, NiCr, SS or pure wattage output.
4. For Ni200, Ti, NiCr or SS resistance wire, you can set your desired coil temperature to fit your taste.
5. For power output mode, set your desired working wattage that best fits your taste.
6. Press (+) and (-) together to choose LCD display orientation.
7. Press (+), (-) and fire button all together can lock the up and down buttons.
8. In case you change the coil or vape in other environment of presetting, you may need to calibrate the Dripbox 160 mod atomizer as new coil: YES (+), NO (-) for best performance.
9. If no display of calibration:
a. Screw down the Subdrip.
b. Press the fire button till LCD displays "Check Atomizer".
c. Screw back the Subdrip and press fire button again.
 |
| 160W Kangertech Dripbox TC Starter Kit W/O Battery(Black) |
#160W Kangertech Dripbox TC Starter Kit W/O Battery
Powered by two 18650 batteries, 160W Kangertech Dripbox TC Starter Kit inherits bottom feeder and squeeze mechanism from previous 60W Dripbox. With Max 160W output, it supports TC/VW modesProduct Introduction: 160W Kangertech Dripbox TC Starter Kit W/O Battery
Powered by two 18650 batteries, 160W Kangertech Dripbox TC Starter Kit inherits bottom feeder and squeeze mechanism from previous 60W Dripbox. You can enjoy dripping without actually dripping. With Max 160W output, it supports TC/VW modes.
Parameters:160W Kangertech Dripbox TC Starter Kit W/O Battery
Dripmod 160
Height: 84mm
Max output: 160W
Juice capacity: 7ml
Battery: 2 x 18650 cell, 30A discharge (NOT included)
Charging: Micro USB port/DC5V/1000mA
Temp Range: 200F -600F/ 100°C -315°C
Suggested resistance: Ni200 (TC mode), Ti, SS at 0.05ohm or above; Nichrome wire at 0.1ohm or above.
Suitable resistance: 0.2ohm or above kanthal
Subdrip 160
Height: 26mm
Diameter: 22mm
Connection: 510 thread with juice delivery mechanism
Coil attach: Stainless steel DIY drip base; 0.25ohm ( 2 x 0.5ohm in parallel)
Replacement coil: Kanthal 0.2ohm (2 x 0.4ohm in parallel)
Airflow: adjustable
- 1 x Subdrip 160
- 1 x Dripmod 160
- 1 x DIY Drip base
- 1 x replacement drip coil(kanthal)
- 1 x accessory pack
- 1 x extra juice tank
- 1 x USB cable
- 1 x Manual
MTL and DL drip tip
7ml e-liquid capacity
Disposal dripping coil
Replaceable dual 18650
Squeeze to adjust your e-juice
Bottom feeder
Easy juice filling without dropper
160W Output with TC function
160W Kangertech Dripbox TC Starter Kit W/O Battery
1. Press the fire button five times in quick succession to turn on/off the MOD.2. After switched on, LCD displays" KANGER TECH" in standby mode.
3. Press fire button 3 times, choose your preferred resistance wire, Ni200, Ti, NiCr, SS or pure wattage output.
4. For Ni200, Ti, NiCr or SS resistance wire, you can set your desired coil temperature to fit your taste.
5. For power output mode, set your desired working wattage that best fits your taste.
6. Press (+) and (-) together to choose LCD display orientation.
7. Press (+), (-) and fire button all together can lock the up and down buttons.
8. In case you change the coil or vape in other environment of presetting, you may need to calibrate the Dripbox 160 mod atomizer as new coil: YES (+), NO (-) for best performance.
9. If no display of calibration:
a. Screw down the Subdrip.
b. Press the fire button till LCD displays "Check Atomizer".
c. Screw back the Subdrip and press fire button again.
Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery(Black)
Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery(Black)
Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery(Black)
Mirror plate main button
Touch screen
Flashlight
Features : Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery
1.Touch screen operation
2.Variable voltage/wattage
3.Calander/time setting
4. Emergency flashlight
5. Power bank
6. Low-voltage warning
7. Short circuit warning
1. Battery assembly: put 2pcs 18650 batteries in the mode and it will power on for self testing.
2. Start:press the main button 3 times to enter the menu settings mode, below items will be shown on display: power on/off, voltage mode, wattage mode, calender and exit menu mode. Press "+" to move cursor right; press "-" to move cursor left.
3. Turn on/off: move the cursor to the on/off icon and press the main button to enter boot mode until the screen shows "POWER ON". It will be powered off after you do the same operation.
4. 10 Seconds cut off: in the main interface, press and hold the main button to smoke. Display shows smoking time. If the time is longer than 10 seconds, the system will switch off the power and display will show "time over".
5. Voltage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "V" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
6. Wattage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "W" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
7. Calender: move the cursor to the calender mode icon and press the main button to enter the date and time setting. The screen will show the exact time, date, month and year. Press the main button to move the cursor and press "+" or "-" to change.
8. Exit menu: move the cursor to the exit menu icon and press the main button to exit the menu.
9. Low-voltage warning: if the voltage of the battery is lower than 6.5+/- 0.1V, the display will show "low-voltage" with no output while pressing "smoking key".
10.Short circuit warning: if short circuit happens on atomizer, the display will show "output short" and stop output.
11. LED flashlight: turn on the device, flashlight will work or stop work by holding the button "-" for 2 seconds. (On the main interface, LED flashlight can not work.)
12 Battery charging
Use micro USB charger (5v, current >800mA), the screen will show charging bar and the current capacity status. When the battery is charged full or stopped charging, the screen will turn off and switch to hibernation.
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery(Black) |
Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery
Heatvape Invader
Multi-functional VV/VW MOD comes with touch screen operation. It can be
powered up to 30W and accepts two 18650 batteries in parallel. Very nice
hand feel and many useful functions.
V/VW MOD comes with touch screen operation. The device can be
powered up to 30W and accepts two 18650 batteries in parallel. It uses
the advanced USA Microchip 8-bit PIC® Microcontrollers to ensure its
stable performance and safety. It has a very nice hand feel and many
useful functions such as calendar, power bank and flashlight.
Parameters : Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery Size of mod: 129.2x60.2x25.7mm
Materials: aluminum alloy and zinc alloy
Variable Voltage: 3.0V-6.0V
Variable Wattage: 3w-30w
Quiescent current: <50uA
Power bank: current 2.1A, voltage 5V
It comes with: Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery
Parameters : Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery Size of mod: 129.2x60.2x25.7mm
Materials: aluminum alloy and zinc alloy
Variable Voltage: 3.0V-6.0V
Variable Wattage: 3w-30w
Quiescent current: <50uA
Power bank: current 2.1A, voltage 5V
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery |
- 1x Invader Mod
- 1x USB Cable with 4 USB ports
- 1x Decorative Ring
- 1x User Manual
Mirror plate main button
Touch screen
Flashlight
Features : Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery
1.Touch screen operation
2.Variable voltage/wattage
3.Calander/time setting
4. Emergency flashlight
5. Power bank
6. Low-voltage warning
7. Short circuit warning
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery |
1. Battery assembly: put 2pcs 18650 batteries in the mode and it will power on for self testing.
2. Start:press the main button 3 times to enter the menu settings mode, below items will be shown on display: power on/off, voltage mode, wattage mode, calender and exit menu mode. Press "+" to move cursor right; press "-" to move cursor left.
3. Turn on/off: move the cursor to the on/off icon and press the main button to enter boot mode until the screen shows "POWER ON". It will be powered off after you do the same operation.
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery |
4. 10 Seconds cut off: in the main interface, press and hold the main button to smoke. Display shows smoking time. If the time is longer than 10 seconds, the system will switch off the power and display will show "time over".
5. Voltage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "V" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
6. Wattage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "W" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
7. Calender: move the cursor to the calender mode icon and press the main button to enter the date and time setting. The screen will show the exact time, date, month and year. Press the main button to move the cursor and press "+" or "-" to change.
8. Exit menu: move the cursor to the exit menu icon and press the main button to exit the menu.
9. Low-voltage warning: if the voltage of the battery is lower than 6.5+/- 0.1V, the display will show "low-voltage" with no output while pressing "smoking key".
10.Short circuit warning: if short circuit happens on atomizer, the display will show "output short" and stop output.
11. LED flashlight: turn on the device, flashlight will work or stop work by holding the button "-" for 2 seconds. (On the main interface, LED flashlight can not work.)
12 Battery charging
Use micro USB charger (5v, current >800mA), the screen will show charging bar and the current capacity status. When the battery is charged full or stopped charging, the screen will turn off and switch to hibernation.
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery |
- No 18650 batteries included. You shall purchase saparately.
- 510 threaded.
- It comes with multi-ports USB cable, which can be used with your personal devices.
 |
| Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery |
ATOM Revolver Subxero VV Kit W/O Battery(Blue)
ATOM Revolver Subxero VV Kit W/O Battery(Blue)
ATOM Revolver Subxero VV Kit W/O Battery(Blue)
Product Introduction:
Parameters: ATOM Revolver Subxero VV Kit W/O Battery
Revolver MOD
Size: 23x 83mm
VV Options: 4.2V, 3.9V, 3.7V, 3.5V
Resistance: 0.2 - 3ohm
Support: 18350/18500/18650 batteries (Not included)
Assassin
Capacity: 6ml
Size: 22 (D) x 72 (L) mm
Thread Type: 510
The kit comes with: ATOM Revolver Subxero VV Kit W/O Battery
Turn on/off the battery (5-Click protection):
The battery is turned on/off by pressing the button 5 times in 2 seconds.
Variable Voltage: ATOM Revolver Subxero VV Kit W/O Battery
While the device is active, press the fire button 3 times to switch between the voltage modes. A light will appear for 2s indicating which voltage level you have selected.
Recharge: ATOM Revolver Subxero VV Kit W/O Battery
Just insert the USB cable to charge it.
Adjust Airflow: ATOM Revolver Subxero VV Kit W/O Battery
Rotate the airflow valve to control the flow of air.
Filling e-Juice: ATOM Revolver Subxero VV Kit W/O Battery
Detach it from a battery. Hold it upside down and unscrew the bottom hardware of the tank. Fill on to the side of the tank up to the bottom of the chimney. Don't insert the liquid into the chimney. Then screw on the bottom hardware back onto the tank. It's highly recommended to prime the coil with e-liquid by inhaling from the tank without activating the battery. Then let the tank sit upright at least 3-5 mins before use.
 |
| ATOM Revolver Subxero VV Kit W/O Battery(Blue) |
#ATOM Revolver Subxero VV Kit W/O Battery
ATOM Revolver Subxero
VV Kit W/O Battery, comes with a VV telescopic Revolver MOD and 6ml
Assassin Tank. You can use 18350/ 18500/ 18650 batteries.
Product Introduction:
ATOM Revolver Subxero VV Kit W/O Battery
ATOM Revolver Subxero VV Kit W/O Battery, comes with a VV telescopic Revolver MOD and 6ml Assassin Tank. You can use 18350/18500/18650 batteries by adjusting the tube length. The variable voltage feature let’s you adjust the power with a simple click of a button. Assassin, the large tank allows you to vape without having to reload. With vertically designed clapton coils, the kit will produce huge clouds and provide a different dimension of tastes.Parameters: ATOM Revolver Subxero VV Kit W/O Battery
Revolver MOD
Size: 23x 83mm
VV Options: 4.2V, 3.9V, 3.7V, 3.5V
Resistance: 0.2 - 3ohm
Support: 18350/18500/18650 batteries (Not included)
Assassin
Capacity: 6ml
Size: 22 (D) x 72 (L) mm
Thread Type: 510
The kit comes with: ATOM Revolver Subxero VV Kit W/O Battery
- 1x Revolver SUBXERΩ Pass-Through Variable Voltage Battery
- 1x Assassin Tank (6ml Cap.)
- 1x Wide Bore Stainless Steel Drip Tip
- 2x Bullet SUBXERΩ Clapton Coils (0.2ohm & 0.4ohm)
- 1x Extra Pyrex Glass Tube
- 1x Micro USB Charger
- 1x Microfiber Cleaning Cloth
- 1x User Manual
- 3x Vinyl Water Resistant Revolver SkinZ
Features: ATOM Revolver Subxero VV Kit W/O Battery
Overcharge Protection
Low power Protection
Short circuit Protection
Charger Protection
Lock Protection
Over Heat Protection
Low Resistance Protection
Power Surge Protection
Wrong connect protection
Low power Protection
Short circuit Protection
Charger Protection
Lock Protection
Over Heat Protection
Low Resistance Protection
Power Surge Protection
Wrong connect protection
 |
| ATOM Revolver Subxero VV Kit W/O Battery |
Turn on/off the battery (5-Click protection):
The battery is turned on/off by pressing the button 5 times in 2 seconds.
Variable Voltage: ATOM Revolver Subxero VV Kit W/O Battery
While the device is active, press the fire button 3 times to switch between the voltage modes. A light will appear for 2s indicating which voltage level you have selected.
Just insert the USB cable to charge it.
Adjust Airflow: ATOM Revolver Subxero VV Kit W/O Battery
Rotate the airflow valve to control the flow of air.
Filling e-Juice: ATOM Revolver Subxero VV Kit W/O Battery
Detach it from a battery. Hold it upside down and unscrew the bottom hardware of the tank. Fill on to the side of the tank up to the bottom of the chimney. Don't insert the liquid into the chimney. Then screw on the bottom hardware back onto the tank. It's highly recommended to prime the coil with e-liquid by inhaling from the tank without activating the battery. Then let the tank sit upright at least 3-5 mins before use.
Tuesday, September 6, 2016
#SMY SDNA 200W TC MOD - 4800mAh(Red)
SMY SDNA 200W TC MOD - 4800mAh(Red)
SMY SDNA 200W TC MOD - 4800mAh(Red)
Product Introduction
SMY SDNA 200W TC MOD - 4800mAh, powered by genuine Evolv DNA200 chip, you can adjust the temperature accurately. With Max 200W output and 200F to 600F TEMP control, it will bring you the most brilliant vaping experience.
Parameters
Size: 94.5 x 51.5 x 25mm
Chip: DNA200
Standard coil: 0.1-2ohm
TC coil: 0.08-1.0ohm
Wattage Range: 1-200W
Constant Output Current: 50A
Thread: 510 spring loaded
Battery: Built-in 4800mAh 35C
Screen: 0.91 inch OLED
TC modes: 200℉-600℉/ 90℃-315℃
This product comes with
Features
1. Genuine Evolv DNA200 chip
2. 200W Max Output Wattage
3. 4800mAh (3x Li-po 1600mAh battery)
4. VW & TEMP Control Function
5. Temperature Protection (450℉ by default)
6. Preheat
Locked Mode:
Press the fire button 5 times with less than 0.7 seconds will cause the device to enter Locked Mode. You can press the fire button 5 times again to exit Locked Mode.
Power Locked Mode:
Holding down both the up and down buttons for 2 seconds will place the device in Power Locked Mode. Under this mode, you will not change the power setting. To exit it, hold up and down buttons for 2 seconds.
Temp Control Mode:
In locked Mode, holding down both the up and down buttons for 2 seconds will place the device in TC Mode.
Stealth Mode:
While locked, holding the fire and down buttons simultaneously for 5 seconds will switch to stealth Mode. You can do it again to switch back to normal mode.
Resistance Lock:
Under Locked mode, hold both the fire and up buttons for 2 seconds to enter Resistance lock mode. Repeat the action will unlock it.
 |
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
SMY SDNA 200W TC MOD - 4800mAh
SMY SDNA 200, powered
by genuine Evolv DNA200 chip, it supports max 200W output and 200F to
600F TEMP control. All will bring you the most brilliant vaping
experience.
|
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
Product Introduction
SMY SDNA 200W TC MOD - 4800mAh, powered by genuine Evolv DNA200 chip, you can adjust the temperature accurately. With Max 200W output and 200F to 600F TEMP control, it will bring you the most brilliant vaping experience.
Parameters
Size: 94.5 x 51.5 x 25mm
Chip: DNA200
Standard coil: 0.1-2ohm
TC coil: 0.08-1.0ohm
Wattage Range: 1-200W
Constant Output Current: 50A
Thread: 510 spring loaded
Battery: Built-in 4800mAh 35C
Screen: 0.91 inch OLED
TC modes: 200℉-600℉/ 90℃-315℃
This product comes with
- 1 x SMY SDNA 200 MOD
- 1 x Micro USB cable
- 1 x Manual
|
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
Features
1. Genuine Evolv DNA200 chip
2. 200W Max Output Wattage
3. 4800mAh (3x Li-po 1600mAh battery)
4. VW & TEMP Control Function
5. Temperature Protection (450℉ by default)
6. Preheat
 |
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
|
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
Locked Mode:
Press the fire button 5 times with less than 0.7 seconds will cause the device to enter Locked Mode. You can press the fire button 5 times again to exit Locked Mode.
Power Locked Mode:
Holding down both the up and down buttons for 2 seconds will place the device in Power Locked Mode. Under this mode, you will not change the power setting. To exit it, hold up and down buttons for 2 seconds.
Temp Control Mode:
In locked Mode, holding down both the up and down buttons for 2 seconds will place the device in TC Mode.
Stealth Mode:
While locked, holding the fire and down buttons simultaneously for 5 seconds will switch to stealth Mode. You can do it again to switch back to normal mode.
Resistance Lock:
Under Locked mode, hold both the fire and up buttons for 2 seconds to enter Resistance lock mode. Repeat the action will unlock it.
 |
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
|
| SMY SDNA 200W TC MOD - 4800mAh(Red) |
- It can work with 510 threaded clearomizers/tanks.
-
No cartomizer/tank comes with.
SMY SDNA 200W TC MOD - 4800mAh(Red) 
SMY SDNA 200W TC MOD - 4800mAh(Red)
Please check Guarantee Policy.
Guarantee period: 1 Year for the MOD.
3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip)
3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip)
 |
| 3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip) |
3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled
3,500pcs 5ml PET
Empty Plastic Bottle with Childproof Cap,Unassembled, one carton, come
with separate empty bottle body, tips and childproof caps.
3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled, one carton, used for storing or mixing e-juice. It comes with separate empty bottle body, tips and childproof caps.
3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip): Parameters
Quantity: 3,500pcs (1 carton)
Capacity: 5ml
Tip: needle tip/regular tip
Material: plastic
Color: transparent
|
| 3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip) |
There're 2 types, one is with Triangle Braille Mark at the top of the cap, the other is smooth. And we'll send two kinds randomly. In future, we will only have Triangle Braille Mark ones.
|
| 3,500pcs 5ml PET Empty Plastic Bottle with Childproof Cap,Unassembled(Regular Tip) |
- It comes with 3,500pcs empty bottle, with separate bottle body, tips and caps.
- We send unassembled empty bottles.
- For needle tips, we also have colorful caps, including black, blue, red, green and orange. If you need colorful caps, pls contact us after placing order. One color for one carton.
Subscribe to:
Posts (Atom)